Directed Electronics Automate 210D Provozní pokyny stáhnout pdf (Strana 29)

Numeric Entry of an Aperture Angle

The numeric entry of an aperture angle corresponds to

a fixed position. The aperture is measured counter-

clockwise starting from the closed draft shield position:

– Enter an aperture angle between 45° and 315°

using the numeric keys (20); e.g., 210

– Confirm this entry by pressing either the

l or r key (23), depending on the direction

you wish the draft shield to open

– The aperture angle and the direction are now

stored for further operation

You can clear the aperture angle by either

– entering an aperture < 45° using the numeric

keys (e.g., “0”) and storing this entry by pressing

the l or r key

– by closing the draft shield manually

Important Note:

The aperture angle and the direction in which the

draft shield opens remain stored even after you have

turned off the display using the e key. This

information will not be erased until you unplug the

balance from AC power.

Opening and Closing the Draft Shield Manually

Of course, you can also open and close the draft

shield by hand.

Important Note:

An open draft shield will always close automatically

if you have not operated the balance for 1minute.

Exception:

– It will not close automatically if you have set menu

code 8 8 1 “Automatic draft shield function off”

(see part 2, “Balance Operating Menu”)

1–25

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 187 188

Žádné komentáře

Directed Electronics Automate 210D Provozní pokyny Strana 29