Directed Electronics Viper ESP 540 Instalační příručka stáhnout pdf (Strana 35)

Internal polarity jumper

A 10A fuse is used as both a fuse and a polarity jumper. This jumper

determines the light flash output polarity. In the (+) position (default), the

on-board relay is enabled and the unit will output (+)12V on the WHITE

wire, H1/2. In the (-) position, the on-board relay is enabled for (-) out-

put on the WHITE wire, H1/2. To access the jumper, remove the sliding

door from on top of the control module, as shown below.

Zones

NNoottee::

The Warn Away

response does not report on the LED.

Zone

Trigger Type

Input Description

Instant trigger

Hood and/or trunk pin switches.

Multiplexed input

Heavy impact from on-board Doubleguard

shock sensor.

Two-stage, progresses

from warning to full alarm

Door switch circuit.

Multiplexed

Optional sensor, Inputs shorter than 0.8

seconds will trigger Warn Away

response,

while inputs longer than 0.8 seconds will

instantly trigger full alarm.

Two-stage (similar to

zone 3)

Ignition input.

FUSE/JUMPER

(-) POSITION

FUSE/JUMPER

(+) POSITION

(DEFAULT)

N3001L_2009-04print.qxd 5/12/2009 11:14 AM Page 29

25-Mar-10

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 177 178

Žádné komentáře

Directed Electronics Viper ESP 540 Instalační příručka Strana 35