Directed Electronics AutoCommand 40027T Instalační manuál stáhnout pdf (Strana 9)

2005 Directed Electronics, Inc.

USER TIPS AND NOTES

The Remote Car Starter must be “enabled” each time the driver has finished driving and taken out

the key in order for the unit to start the vehicle remotely.

After the key has been removed, you must push

the control switch OFF (LED turns Green) and then push it back ON (LED turns Red) again while no key is in the

ignition. The LED will glow red signifying the system is ready to start. This “control switch” or “set switch”

prevents unauthorized starting of the car by someone unfamiliar with the system who may be using the vehicle.

If you forget to set the switch, it may also be activated by pushing the transmitter and holding the button down

for seven seconds. To eliminate the need for this, see Option #7 (Setting Program Features).

The AutoCommand

Remote Car Starter will turn the car off if the driver does not insert and turn the key within

10 or 15 minutes. After the AutoCommand

Remote Car Starter has started your car, simply put in the key and

turn it to the “run” or “on” ignition position (not the crank position), push the brake pedal and drive away.

The AutoCommand

Remote Car Starter has numerous safety and security features that make it difficult to steal

your car without the key being in the ignition. Putting your car in gear, pushing the brake pedal or opening the hood

will turn the unit off unless your key is in the ignition and turned to the “run” or “on” position.

If all features are installed, your transmitter will function as follows:

Button: Do not push for your first ‘main’ vehicle

Once: To operate vehicle #2 - then any of the 4 buttons (LED flashes red

and green)

Again: For vehicle #3 - then any of the 4 buttons (LED flashes red)

Again: For vehicle #4 - then any of the 4 buttons (LED flashes green)

Button:

Once: Start the car with all accessories left on

Again: Stop the car

Button: Once: Turn on headlights for 30 seconds

Again: Turn off headlights

Hold down for 4 seconds for PANIC mode (45 seconds long)

Button

Once: Lock the door / arm the alarm

Button Once: Unlock the door / disarm the alarm

Hold down for 4 seconds to open the Trunk.

(If you get 4 chirps – that means the alarm was triggered while

you were away)

The LED on the transmitter will display 3 different colors - Red for the start button, Yellow for the

lights button, and Green for the lock and unlock buttons. The transmitter is powered by a long life lithium

battery (CR 2032 style). The transmitter and receiver are FCC and DOC approved.

To Disarm the Alarm without the Transmitter:

If the doors are locked, the alarm is set, and you’ve lost your transmitter, you can still disable the alarm. Here is

how: Enter the vehicle (alarm will sound) and insert the key and turn it to the ‘run’ position (the position where the

instruments and gauges turn on). Push and release the On/Off switch Off and On 8 times in a row to disable the

alarm.

Valet Mode:

Pushing the Control switch off (LED turns Green) puts you in Valet Mode. In Valet Mode, the Remote Car Starter

and the alarm will not function. This lets you turn off the car starter when having the vehicle serviced. The only

functions that work in Valet Mode are the keyless entry, lights and panic. Simply push the Control switch once

again (LED turns Red) to exit Valet Mode.

v5.3

limited lifetime consumer warranty

Directed Electronics, Inc. (hereinafter “Directed”) promises to the original purchaser to repair or replace

with a comparable reconditioned Directed DIY remote start keyless entry unit if this Directed DIY

remote start keyless entry unit (hereinafter “Unit”), excluding without limitation, any remote transmitters

or associated accessories, proves defective in materials or workmanship under normal use for the life of the

vehicle which the Unit is originally installed. During this period, so long as the Unit remained installed in

the original vehicle, Directed will at its option, repair or replace this Unit if it is proved defective in

workmanship or material PROVIDED the Unit is returned to Directed’s warranty department at One

Viper Way, Vista, CA 92081, along with $20 postage and handling fee, a bill of sale or other dated proof

of purchase bearing the following information: Date of purchase, name and location of the merchant who

sold the Unit, and product description. This warranty does not cover labor costs for the removal or

reinstallation of the Unit. This warranty is non-transferable and does not apply to any Unit that has been

modified or used in a manner contrary to its intended purpose, and this warranty does not cover damage

to any Unit caused by installation or removal of the Unit. This warranty is void if the Unit has been

damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of

defects in materials or workmanship. Directed makes no warranty against theft of a vehicle or its contents.

THE FOREGOING WARRANTY IS THE EXCLUSIVE PRODUCT WARRANTY, OTHERWISE,

ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED

WARRANTY, WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE ARE EXPRESSLY EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT

ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON

TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT.

DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES

INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. SOME STATES DO NOT ALLOW

THE LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU.

LIMITATION OF DAMAGES AND LIABILITY. CONSUMER’S REMEDY IS LIMITED TO REPAIR

OR REPLACEMENT OF THE UNIT, AND IN NO EVENT SHALL DIRECTED’S LIABILITY

EXCEED THE PURCHASE PRICE OF THE UNIT. IN ANY EVENT, DIRECTED SHALL NOT BE

LIABLE FOR ANY DAMAGES INCLUDING, BUT NOT LIMITED TO, ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST PROFITS, LOST

SAVINGS, OR, TO THE EXTENT ALLOWED BY APPLICABLE LAW, DAMAGES RESULTING

FROM DEATH OR INJURY ARISING OUT OF

OR IN CONNECTION WITH THE

INSTALLATION, USE, IMPROPER USE, OR INABILITY TO USE, THE PRODUCT, EVEN IF

THE PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES

DO NOT ALLOW THE EXCLUSION OF LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT

APPLY TO YOU. THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN

THE CONSUMER AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE WITH

CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA.

IMPORTANT NOTE:

This product warranty is automatically void if its date code or serial number is defaced,

missing, or altered.

Make sure you have all of the following information from your dealer:

A clear copy of the sales receipt, showing the following:

➤

Date of purchase

➤ Authorized dealer’s company name and address

➤ Item number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Komentáře k této Příručce

Žádné komentáře

Directed Electronics AutoCommand 40027T Instalační manuál Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Vzdálené spouštěče Directed Electronics AutoCommand 40027T