Directed Electronics 719T Instalační příručka Strana 2

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 1
2 © 1995,1996 Directed Electronics, Inc. Vista, CA
97N719T.PM5 4/97
Do not disconnect the battery if the vehicle has an anti-theft-coded radio. If equipped with an air bag, avoid discon-
necting the battery if possible. IMPORTANT: Many airbag systems will display a diagnostic code through their
warning light after they lose power. Disconnecting the battery requires this code to be erased, a procedure that can
require a trip to the dealer.
Before beginning the installation:
Check with the customer on Status LED location.
Remove the domelight fuse. This prevents accidentally draining the battery.
Roll down a window to avoid being locked out of the car.
During the installation:
Mount the unit in the engine compartment, away from heat sources and areas that must be accessed
for routine maintenance of the vehicle.
Mount the unit with the siren portion facing down. This will prevent water damage to the unit.
Route the wires away from the unit and make sure they are securely fastened away from the moving
parts of the engine.
Place the antenna as high as possible and as straight as possible for maximum operating range.
INSTALLATION POINTS TO REMEMBER
Two 491T
remote
transmitters
Status LED
Zobrazit stránku 1
1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře